hi,
I have an MC92N0 with the 5250 keyboard, if I press Ctrl + J or Ctrl L the RollUp or RollDw function does not work. If I use the Virtual Keyboard 5250, the command is executed.
where am I wrong?
Thanks in advance
Rino
hi,
I have an MC92N0 with the 5250 keyboard, if I press Ctrl + J or Ctrl L the RollUp or RollDw function does not work. If I use the Virtual Keyboard 5250, the command is executed.
where am I wrong?
Thanks in advance
Rino
using Telnet Wavelink rel. 7.3.247 on the MC92N0 5250, pressing the Ctrl + J / L keys, the ROLL UP / DW function will not work.
where am I wrong?
thanks in advance.
Rino
Hello,
I am trying to set the answer back onto Wavelink Terminal emulation CE , but without success.
The name of the unit is talking to a VT200 WMS server and needs the name to identify it to the system.
I am setting DESMTM030 . But cant work out the format to set in the product Configuration tool.. Setting in Emulation Paramaters > emulation > VT & HP > common > VT new answer back.
Thanks for your help.
Wavelink Terminal Emulation software features the broadest range of supported devices across all major AIDC mobile device vendors and OS platforms. As an agnostic solution, Wavelink TE family of clients supports Windows based, Android, iOS and DOS/legacy devices, and preserves existing infrastructure investment, while providing an easy migration path to newer devices and technologies.
Wavelink TE helps your system and people work smarter by providing intelligent data collection and communications functions. Prevent errors and inefficiencies caused by incorrect data entry or scans, take advantage of easy on-screen navigation, and maximize the uptime of your workforce by avoiding dropped connections, directed messages and error notices.
Wavelink Emulation License Server (Optional):
The Wavelink Emulation License server makes it easy to distribute and keep track of licenses across a large number of hand held devices by centralizing this function in an easy-to-use application. To download select "Emulation License Server" from the Wavelink Product Downloads menu.
Wavelink ConnectPro Server (Optional):
The ConnectPro Server allows you to avoid dropped connections and automatically reconnect by acting as an intermediary connection server between the client device and the host application server. To download select "Emulation ConnectPro Server" from the Wavelink Product Downloads menu.
Hello, can you please tell me if emulation license server versions v4.3006 and v4.3002 will run on Windows Server 2016?
thanks
Windows CE or Windows Mobile device running TelnetCE
TelnetCE 7.x and newer
Make sure that you have Windows Mobile device center open and connected to the device. Press "Connect with setting up the device". Then you can minimize the mobile device center application while you perform the following steps:
Environment:
Issue/Question/Problem:
Resolution:
Here are the basic steps:
Setup
Extraction
Here are a few ways you could extract the information
Avalanche Remote Control
USB Cable Connection with Windows Mobile Device Centre or Activesync
SD or Micro SD Card
If you have any questions or need any further clarification about anything on this document, please leave a comment.
If you find multiple directories, then import the termcfg.bin file from each of the directories to find which directory has the most recent information.
Hi all
i need to use DATALOGIC FALCON X3 connected to an As400 via 5250 emulator .. i don't understand how to configure keyboard key (not virtual keyboard) so that i can emulate "ENTER" and "Exit fields" keys tipical for As400
Thanks in advance
Problem
I have configured and pushed the "font type" emulation parameter but my new font is not showing up when I launch telnet. What is needed to change the font type telnet uses on my device?
Response
Telnet can use any font that is loaded onto the device. The key here, is that the configured font MUST be installed on the device for telnet to be able to use it. You can also choose the font type from the device by clicking options>configure>emulation>font.
On telnet for windows 7 and above the settings are located here Term>>Configure>>Emulation Parameters>>Emulation>>Display>>Font name
Note: A WARMBOOT IS REQUIRED FOR THE NEW FONT TO WORK CORRECTLY.
Please note if you are using Windows 7 and higher versions you need to make two more additional changes
Navigate to this place Term>Emulation parameters>Display>
Stretch screen height by default this is enabled, change it to disabled.
Stretch screen width by default this is enabled, change it to disabled.
once you save the changes the font size will change.
Hi
i would need to change F1 as default key to open the options menu' ;
in the device , if i open "IBM Host" and click on "Hide menù", i can change F1, with another function keys .. how can i do this with Wavelink Terminal Emulation
Thanks in advance
In the configuration of the License Server you can define ‘OtherServer’. This is used for redundancy of the server and will synchronise all databases of these servers:
So if you install a new server and configure ‘OtherServer’ on both servers to point at each other, the licenses will immediately be available on the new server. You will have to configure all devices to connect to the new server:
Again, for instructions on how to set up the emulation license server, please see: https://community.landesk.com/support/docs/DOC-28033
Hi Team
After os upgrade vc6090 windows mobile 6.5 the TelnetCE version 7.3.xxx require licence
Can we use license Global or we have to specify Country or Continent?
Hi all
i would like to know if is it possibile to set a particular tone (different from barcode read or type in keyborad) when the system (Ibm i -As400 in this case) write a 5250 screen with MSGALARM activated
Thanks in advance
P.S. my need is to inform the user via audio/beep that shoud check the error in the display correct the error
Hi, We are using MC9190 with WL telnet 7.3.146 and all function keys are working fine. Now we are migrating to MC32N0.
We exported the config file (.wltna) and imported it into the WL configurator 7.3.303 to keep the same configuration parameters.
But now, we figured out that the F1 key is not behaving as in the MC9190. The function expected is to go back to the previous screen/menu, but it is not happening with MC32N0. It looks like the F1 key is not working at all.
We tested the key at Program Diagnostics screen and the key code is the same on both PDAs (3B00). Even the regular key is displaying the right key code (letter a = 0061).
does anybody know what is causing it?
Regards.
Renato Foresti
What is the correct PO number for Wavelink TE client for ANDROID? I have seen only Windows version product numbers...
Problem/Issue:
Scanning is no longer working on any applications on my Intermec/Honeywell devices after I rebooted the device.
Resolution:
This can be caused when you set the Allow Scan Ahead feature in Telnet Emulation to 'No' and then reboot. Turning this feature to no disables the scanner and then a reboot will cause the scanner to be disabled for all applications.
The resolution is to ensure that you have the Allow Scan Ahead feature set to 'Yes'. Reboot as needed.
Article on how to setup Scan Ahead: