Hello,
I use the wavelink TelnetCE Version 7.0.01 on a Windows CE (Motorola MC9100). Is there an option in the wavelink software for an automatic carriage return? I think about a putty client. With a putty client I can change the size from the terminal windows and at the end of a line putty makes an automaticc carriage return.
Is that also possible with wavelink TelnetCE?
Thank you for any help
Olaf
I'm sorry Cachilli, but I tried what you told me about the way to enable/disable RFID from a script, and I noticed that don't works.
I don't know if I'm wrong or I understood not correctly.
I tried a simple:
Script( RFID_ON )
Activate( From_Menu )
Escape_Sequence( "$1" )
Return
I went on mine right screen with an input field and called manually the script I created, but without success.
It seems to launch it, but when I push the trigger it don't read and start the laser scanner reader, not the RFID reader.
I need a simple example script who let me enable/disable RFID.
Thanks
I have bought Symbol MC3190 (not new). After installation of Telnet CE 7.0 (pre-licensed on this devises), it asks me for license number. Where i can get it?
Problem with the scanner in a M3 Mobile Sky device
Telnet CE client on a M3 Mobile Sky device or other M3 mobile device
The scanner works properly with other aplications (for example the Word Mobile), but when I launch the terminal emulation it doesn't works (there is no response when pressing the scanner buttons)
I solved the problem: the parameter "OS Handles All Special Keys", wich default value is disabled, must be enabled.
This document was generated from the following discussion: Problem with the scanner in a M3 Mobile Sky device
This document outlines the common Aid Codes for 5250.
*The AID (attention indicator) code identifies to the host system the function being requested from the keyboard.
*The Attention Identification Code is a byte sequence that is generated when the operator presses certain function keys. The following AIDs are supported by the 5250 protocol emulator
| Key | Aid Code (in Hex) |
|---|---|
| Command 1 | 31 |
| Function 2 | 32 |
| Keys 3 | 33 |
| 4 | 34 |
| 5 | 35 |
| 6 | 36 |
| 7 | 37 |
| 8 | 38 |
| 9 | 39 |
| 10 | 3A |
| 11 | 3B |
| 12 | 3C |
| 13 | B1 |
| 14 | B2 |
| 15 | B3 |
| 16 | B4 |
| 17 | B5 |
| 18 | B6 |
| 19 | B7 |
| 20 | B8 |
| 21 | B9 |
| 22 | BA |
| 23 | BB |
| 24 | BC |
| Clear | BD |
| Enter/Rec Adv | F1 |
| Help (not in | F3 |
| operator-error mode) | |
| Roll Down (or page up) | F4 |
| Roll up( or page down) | F5 |
| F6 | |
| Record Backspace | F8 |
| Auto Enter (for selector | 3F |
| light pen) |
* Aid Code Definitions taken from IBM
hi!
How view emulation keyboard fullfunc keyboar at start? pleasee! or how i can resize the aplication area?
Thanks a lot!
Problem:
When scannng with a COM scanner, some of my scans are split or only some of the scan data makes it through
Example:
Barcode: 1234567890
Scan data: 1234
Resolution:
to resolve this issue there are a few steps to perform on both the scanner itself and with in the Wavelink Terminal Emulation..
Steps to resolve:
Use Com Start/End Chars
A start character and end character can be specified to prevent noise or other unwanted data from being used from the com port. Only data between the start and end characters will be used. To enable the use of the start and end characters, select "Use Start and End" for this option.
If incoming data is being split or combined incorrectly, then the "Use only End" or the "Use Start and End" option can be used. If the "Use only End" option is used, then the incoming data is queued until the End character is received. The start and/or end characters will be discarded.
Default = Disabled
This value was changed to "Use Start and End"
Once this has been completed you will now need to set up the scanner. You can do so by scanning the attached sheet of bar codes.
Environment:
Problem/Issue:
Resolution:
Good morning,
in this Release the Industrial Brower/WEB don't load a website.
TE want to dowload the website.
Useing IE direct, everything work's fine. And the older Version v7.3.147 everything fine.
Any ideas about this?
Thanks a lot.
Attached is the Telnet Screen Reformatter Reference Guide.
Wavelink Terminal Emulation software features the broadest range of supported devices across all major AIDC mobile device vendors and OS platforms. As an agnostic solution, Wavelink TE family of clients supports Windows based, Android, iOS and DOS/legacy devices, and preserves existing infrastructure investment, while providing an easy migration path to newer devices and technologies.
Wavelink TE helps your system and people work smarter by providing intelligent data collection and communications functions. Prevent errors and inefficiencies caused by incorrect data entry or scans, take advantage of easy on-screen navigation, and maximize the uptime of your workforce by avoiding dropped connections, directed messages and error notices.
Wavelink Emulation License Server (Optional):
The Wavelink Emulation License server makes it easy to distribute and keep track of licenses across a large number of hand held devices by centralizing this function in an easy-to-use application. To download select "Emulation License Server" from the Wavelink Product Downloads menu.
Wavelink ConnectPro Server (Optional):
The ConnectPro Server allows you to avoid dropped connections and automatically reconnect by acting as an intermediary connection server between the client device and the host application server. To download select "Emulation ConnectPro Server" from the Wavelink Product Downloads menu.
Problem:
When scannng with a COM scanner, some of my scans are split or only some of the scan data makes it through
Example:
Barcode: 1234567890
Scan data: 1234
Resolution:
to resolve this issue there are a few steps to perform on both the scanner itself and with in the Wavelink Terminal Emulation..
Steps to resolve:
Use Com Start/End Chars
A start character and end character can be specified to prevent noise or other unwanted data from being used from the com port. Only data between the start and end characters will be used. To enable the use of the start and end characters, select "Use Start and End" for this option.
If incoming data is being split or combined incorrectly, then the "Use only End" or the "Use Start and End" option can be used. If the "Use only End" option is used, then the incoming data is queued until the End character is received. The start and/or end characters will be discarded.
Default = Disabled
This value was changed to "Use Start and End"
Once this has been completed you will now need to set up the scanner. You can do so by scanning the attached sheet of bar codes.
Good morning,
in this Release the Industrial Brower/WEB don't load a website.
TE want to dowload the website.
Useing IE direct, everything work's fine. And the older Version v7.3.147 everything fine.
Any ideas about this?
Thanks a lot.
Wavelink Terminal Emulation software features the broadest range of supported devices across all major AIDC mobile device vendors and OS platforms. As an agnostic solution, Wavelink TE family of clients supports Windows based, Android, iOS and DOS/legacy devices, and preserves existing infrastructure investment, while providing an easy migration path to newer devices and technologies.
Wavelink TE helps your system and people work smarter by providing intelligent data collection and communications functions. Prevent errors and inefficiencies caused by incorrect data entry or scans, take advantage of easy on-screen navigation, and maximize the uptime of your workforce by avoiding dropped connections, directed messages and error notices.
Wavelink Emulation License Server (Optional):
The Wavelink Emulation License server makes it easy to distribute and keep track of licenses across a large number of hand held devices by centralizing this function in an easy-to-use application. To download select "Emulation License Server" from the Wavelink Product Downloads menu.
Wavelink ConnectPro Server (Optional):
The ConnectPro Server allows you to avoid dropped connections and automatically reconnect by acting as an intermediary connection server between the client device and the host application server. To download select "Emulation ConnectPro Server" from the Wavelink Product Downloads menu.
Hi all,
I have created a new virtual keyboard in the Wavelink TE application. I starts automatically when connecting to the telnet server. But the size is very small as we use a full quertz keyboard with additional function keys. Manually resizing the virtual keyboard after each start is no solution so I’d like to know how I can change the default size of the virtual keyboard after startup. Is it also possible to change the startup position of the keyboard?
Many thanks in advance.
hi!
How view emulation keyboard fullfunc keyboar at start? pleasee! or how i can resize the aplication area?
Thanks a lot!
This document has been written in regards to utilizing a Bluetooth scanner with Wavelink TE that is being controlled by the OS.
Environment:
Problem/Issue:
Device will allow for Bluetooth scanner to work outside of Wavelink TE but once user is within Wavelink TE Environment, the scanner will no longer generate a beam.
Resolution:
Within Emulation Parameters make your way to Scanner -> Common
Alter Disable Scanner to Yes and No Scanner Configuration to Do Not Configure Scanner.
Optionally you may need to set Default Scanner to be listed as the device name such as Bluetooth Scanner.
This article covers the supported sleds for TE iOS.
Honeywell Captuvo SL22
Verifone vx600
Verifone E315
Infinite Peripherals Linea Pro 5
We just got new WT4100 from our distributor. Using with TelnetCE at version 7.3.144 (5250 and WT100 sessions). The problem we are facing is that after boot an aoutostrup applican (WT41NOSTARTUP) is automatically launced by the system. This application is undesired and in conflict wiith the one (TelnetCE) we configured to startup.
The main question is how to remove the WT41NOSTARTUP application from startup. We already checked that the application is not defined into the startup folder. Also can see that the WT41NOSTARTUP has a shortcut onto the desktop. If we remove from the desktop at next boot it reappers.
Regard Antonio.
Environment:
Problem/Issue:
Resolution:
Terminal Emulation Client 7.3 User Guide
Features in the TE Client for Android
Terminal Emulation Client for Android User Guide (v 1.3)
Product Overview
Terminal Emulation Industrial Browser Reference Guide
Speakeasy 2.45 Reference Guide
Speakeasy User Training Paper
Terminal Emulation Scripting Reference Guide
Testimonial
Product Overview
Download Page
TE License Server 4.3 Reference Guide
Terminal Emulation License Server FAQs
Download Page
Using SSH with Terminal Emulation
Download Page
ConnectPro 4.4.1 User Guide
